Phase Tester
SPT-3rt
- 1. Detect the phase accuracy in any audio system, prevent the musical signal from cancellation due to the opposite phase.
- 2. Detect the XLR signal cable to prevent it from contact fail, brokerage or opposite connection.
- 3. Built-in external microphone input socket in order to use for the harder environment such as the hanging speaker cluster.
- 4. Testable range from 10 cm to 3 meters. Some ideal environment can be tested far away from the axis of speaker for 7 meters.
OVERVIEW
SPT-3rt is the best tools of UNiKA Stage Series. This tool is suitable for any speaker manufacturer, touring and fixed installation applications. It can be used for testing phase either speaker or balance cable. An external microphone input socket can be connected external dynamic microphone to test the speakers that have been hung up. By using neodymium magnet to combine transmitter and receiver units for easy carrying.
DESCRIPTION
SPT-3t Transmitter
① Buzzer to generate pulse tone.
② Neodymium magnet to combine SPT-3r receiver.
③ HOT PIN selector, select test pin of XLR cable either pin-2 or pin-3.
④ Linear pot to tune pulse tone level.
⑤ Release screw to open battery cabinet. Recommend to use 9V PP3 Alkaline battery.
⑥ Neodymium magnet to combine SPT-3r receiver.
⑦ Male XLR connector to connect balance cable to send pulse tone to mixer.
⑧ Power and pulse tone indicator.
⑨ Power switch.
SPT-3r Receiver
① Omni direction microphone.
② Red color out phase indicator.
③ Green color in phase indicator.
④ Input selector, select test sources and applications from built-in Mic/Cable test/EXT MIC etc.
⑤ HOT PIN selector, select test pin of XLR cable either pin-2 or pin-3.
⑥ Release screw to open battery cabinet. Recommend to use 9V PP3 Alkaline battery.
⑦ Neodymium magnet to combine SPT-3t transmitter.
⑧ Female XLR connector to connect external dynamic microphone.
⑨ Neodymium magnet to combine SPT-3t transmitter.
⑩ Blue color power indicator.
⑪ Power switch.
SPECIFICATIONS
SPT.3rt | ||||
---|---|---|---|---|
Transmitter | ||||
Signal type | Pulse tone from buzzer | |||
Frequency spectrum, electrical | 1Hz to 20KHz | |||
Frequency spectrum, acoustic | 200Hz to 5KHz | |||
Output level, electrical | 0 to 1V (Acoustic level is fixed) | |||
Output load impedance | >1KΩ | |||
Output source impedance | 1KΩ | |||
Power supply | 9V PP3 Alkaline battery (approx. 50 hours) | |||
Power consumption | 10mA | |||
Receiver | ||||
Frequency spectrum, electrical | 1Hz to 20KHz | |||
Frequency spectrum, acoustic | 10Hz to 1KHz | |||
Input impedance (Mic) | 1KΩ | |||
Input impedance (Line) | 10KΩ | |||
Input level (Mic) | 10mV - 1V | |||
Input level (Line) | 0.5V to 50V | |||
Output level | 0V to 1V | |||
Power supply | 9V PP3 Alkaline battery (approx. 50 hours) | |||
Power consumption | 10mA | |||
PHYSICAL CHARACTERISTICS (whole set) | ||||
Dimensions/Shipping dimensions ( W x D x H ) | 120 X 95 X 56 mm | |||
20pcs packs dimensions ( W x D x H ) | 245 X 195 X 117 mm | |||
Weight/Shipping weight | 0.4 Kg / 0.45kg | |||
20pcs packs shipping weight | 10.0 Kg | |||
Operating temperature | 0°~50°C | |||
Storage temperature | -30°~+75°C |